Author Archive: Aaron Tucker

How To Fix A Faulty Light Switch

Home Improvement Advice – Fixing Switches


An electrical light switch starts creating mess after sometime and replacement seems to be the only solution available. It is one of those tasks that you can complete without the need of a professional. Before you run ahead with the project, gather some information on replacing a faulty electrical light switch.

Switches are an integral component of almost all electronic devices – fans, televisions, sewing machines, blenders, and of course, lights. Without switches, these devices would be extremely non-functional and largely inefficient. Why? Because they could not be turned on an off, a most important function in any device. Though not simple, fixing switches yourself can be done. Always remember to get in touch with a professional if you’re unsure of anything and take the necessary safety precautions at all times.

How does a switch work? How does it malfunction?

If you’re going to be fixing switches, it is important to know how they work. A switch controls the flow of an electrical current. It usually has two functions – breaking the current (turns the device off) and completing the current (turns the device on). A switch can malfunction for two reasons – faulty contacts (the electric wiring that connects the circuit) or faulty housing (the outside structure of the switch).

To repair the switch, first test the switch and determine the problem, and second, fix the problem:


1. Take the appliance apart to allow access to the switch. To test or diagnose the switch, you will need to take apart the appliance. The first thing to do is unplug the appliance from all power sources for the time being – you do not want to be shocked while handing the electrical components of the appliance. If the switch is a light switch, turn off the power that controls that area of the home. This is done using your home’s circuit breaker. Now, take apart the appliance.

2. Fix the contacts. Sometimes, the only thing necessary is to repair the contacts. Now that you have your appliance disassembled look at your switch for any signs of the problem. If the contacts are dirty, clean them using an emery board and then double over with a soft cloth. If contacts are out of place, ease them back so that they are aligned.

3. If fixing the contacts isn’t possible, replace the switch. This is a several step process. You will remove the current switch and replace the wires from that switch into the new switch, in the same order they were on the former switch. Refer to further instructions from the switch and device.

One Radiator Not Working

One Radiator Not Working


Have you had that one radiator not working at your home?

Before doing anything else, you must know what to check first.

Identify the Problem

Is your radiator not heating up in a specific part of your house?

It can either be that on the 2nd floor and above, one radiator is not heating up or vice versa where your radiator is not heating up in the basement and is working on the succeeding floors.

The reason for radiator not working above is either the pressure is not enough or there could be air trapped inside the pipes. To have an exact pressure in the basement where the boiler is located should be 4, on the first floor you will add another 5, and then succeeding each floor. If you have a normal or regular valve then manually adding the exact pressure can help or is necessary.

If your radiator is not heating up below, most common reason for this is that there may be blockage due either system is old. Dust and rust build up gradually in your central heating system. That’s why most people suggest you have to flush it out by contacting an engineer for it.

This must be done quickly to avoid paying high electrical bills. Flushing may take some time depending how large your heating system is but it will be worth it instead of enduring the cold weather during winter season.

Learn How to Bleed your Radiator

Bleeding your radiator is a simple repair method that anyone can do.

What you need are a Radiator key, a bucket, and a used cloth.

Before checking the floor or room where the radiator is not working, make sure to turn off your heating system first. This is necessary to avoid first degree burns due to contact with hot water to your skin.

Once the heating system is off, hold your radiator key and insert it on the valve located above.

The correct way to do this is to rotate the radiator key slowly from right to left. On the other hand, hold the cloth covering the valve to be sure you won’t be splashed with hot water or air. This is done to slowly let the air out. You will hear a fizzle sound until slowly fades away.

Rotate the radiator key from left to right tightening the radiator valve.

Take note that the pressure will drop so you need to manually add the exact pressure.

5 Useful Spring Lawn Care Tips

Spring Lawn Care Tips

Summer is the time to relax in your garden, and the true significance of a lawn is only accepted when you want it the most. The benefit of having a great lawn is not just that it is a great asset during summer or other times when you want it, but that it augments the value of your house. So, to have a properly maintained lawn, there are certain precautions that you need to take frequently.

Many people cut their grass extraordinarily short so that they can take some off before the subsequent mowing. However, the neatest thing is to let your grass be a height of 6-8 cm and not cut your grass lower than this. This can ensure that the soil can preserve moisture better and also the grass will have a deeper root system which will support the growth process. Never cut your grass when it is wet. Cutting grass when it is dry provides help in avoiding close crop cutting; and also protects the blades of the lawnmower from rusting.

Always ensure that your mower has sharp blades so that your lawn is maintained properly. The reality is that cutting your grass with a blunt blade will hamper the growth of the grass and so mower blades have to be checked periodically for sharp blades. An excellent idea to provide nitrogen to your grass is to let the turf clippings remain on the grass after cutting it. This will give you a healthy and green lawn.

However, in certain situations like when the lawn is wet, grass clippings can prohibit the growth of the grass. In such an eventuality, the grass clippings are capable of covering the grass to the limit that sunlight doesn’t penetrate the grass below and it withers off and dies.

Another imperative aspect of lawn care is acceptable watering. Suitable watering includes even distribution and the ideal quantity of water that’s given to the lawn. As far as quantity is anxious, about 2.5 cm of water is the right proportion to be given to your lawn. To make sure, place a container while watering the grass and check the level of water after you have finished with your watering.

This will make sure that you never go over the top with the watering. Excess watering or absence of watering can both harm your garden. The ideal time to water your lawn is the small hours of the morning as this prevents evaporation due to sunlight. Watering your garden in the morning also forestalls it from being troubled by diseases.

As far as tools are concerned, also check out for used landscaping appliances. If you take these simple steps into account, you will have a great looking garden which you can enjoy during the summer and spring.

How To Replace a Leaking Cistern – 5 Easy Steps

How Do You Replace Leaking Cisterns

Toilets are possibly the least exciting thing despite being the second most used accessory in the bathroom just after the basins. So, no wonder, people get stressed over all the different parts available in a toilet. You must pick the right toilet spares first time around otherwise your entire house leaking will fall into chaos over the lack of a functional toilet. Hence, it’s wise to get rid of that outcome.

Among all parts in a toilet, a cistern plays an important role. If your toilet cistern is leaking or has some fault, you need to replace a cistern on your bathroom toilet.

How Do You Remove Leaking Cisterns –

Before starting the process, check whether the toilet is flushed well. In order to empty the cistern, leave the toilet pan down. After that, shut down the stop tap – located to the side of a toilet. Remember that, you need to take additional precautions to make sure that the stop tap doesn’t end up letting you down. However, using a pipe slice can cut off the stop tap and you can insert a push fit at the stop end. This way, if your stop tap wants to let you down, it can’t!

Remove nuts with a screwdriver or power drill. For instance, a nut connecting the cistern to the water supply, the two other nuts that keep the toilet pan to the cistern must be removed.

Overflow pipe, as well as the two screws supporting the cistern, must be removed.

Once completed, just lift the cistern from the toilet comfortably. If there’s any fluid remaining inside, pour down the toilet gently.

Due to its simplicity, the leaking cistern toilet does not demand a lot of labour from your plumbers during the installation stage. All they have to do is adjoin the plumbing and secure it firmly to the bathroom wall and your leaking cistern toilet is freshly fixed up and ready for use.

In addition to its simplicity, the leaking cistern’s spares and parts are in abundance in the plumbing market. This is particularly so when compared to spares for the likes of the elevated toilet with concealed cisterns.


Conclusion –

A toilet cistern is vital as it pushes water into the toilet bowl, flushing out the existing contents and refilling the bowl with fresh water. So, you should invest in a good quality toilet cistern spare to replace the leaking one. When it comes to replacing leaking cistern in a toilet, nothing beats the beauty and style of the minimalist cistern spares design!